|Standard:||BS-5131, SATRA TM20||Capacity:||0-18.3J (13.5ft-lb) Minimum Reading 0.68J (0.5ft-lb)|
|Horizontally Holding Moment of Pendulum:||17.3N-m (12.7ft-lb)||Hammer:||φ108±1mm|
|Adjustable Range of Base Clamp:||(H)-25mm||Angle:||0~45degree|
shoe product tester,
impact test equipment
Heel Impact Testing Machine/shoes heel impact tester(GW-025)
• Brief introduction:
This tester is used to determine the endurance of ladies' shoe to receive the occasional heavy blows during wear. A heel clamped with the tip uppermost and the stem approximately vertical is subjected to repeated blows by a pendulum striker. The energy of the blows increases successively until the heel fails.
• Technical Specifications:
|Model||GW-025 Heel impact testing machine|
|Capacity:||0-18.3J (13.5ft-lb) minimum reading 0.68J (0.5ft-lb)|
|Horizontally Holding Moment of Pendulum:||17.3N-m (12.7ft-lb)|
|Adjustable Range of Base Clamp:||(H)-25mm|
• Standard for:
BS-5131, SATRA TM20
• Attached accessories:
Manual locking fixture
What about the product quality?
For our products,each instrument must be carried out 100% quality calibration and test when delivery goods.With CE certificate,we are very confident in our products,and we will pack them with safety wooden case to protect the machine when transport oversea .
What about usage of the Equipment?
we will also give your professional guidance(Product operating manual and video),each products comes with a USB flash drive which have all the details.
What about standards support?
We are strictly following different international standards such as EN,ISO,ASTM,AATC,JIS,GB ect,and had been recognized by SATRA,CSA international standard agency.
What about warranty?
Guarantee one years( if the parts damage within one year, we can replace the part for free)
If customer need any technical support,we can help them solve their problem through email,video meeting.We also can provide door to door service,but customer need to bear the travel fees.
Contact Person: Mr. liangwen Zhong
Tel: 86 13929200954