|Standard:||GB/T16584 ISO6502||Heating Rate:||15ºC/min|
|Control Range:||Room Temperature~200 ºC||Minimum Display:||0.01ºC|
|Torque Range:||0--20NM||Minimum Torque Reading:||0.001NM|
|Number Swing Angle:||±0.5ºC ,±1ºC ,±2ºC (Standard Angle 1 Degree)||Swing Angle:||100r/min(1.66HZ)|
abrasion resistance testing machine,
rubber testing instruments
No Rotor Vulkameter Rehometer(GW-220A)
Vulcanization tester is controlled rubber quality rubber processing industry,Rapid testing and rubber basic research the most widely used instrument,Rubber formulation optimized combination provides accurate data,Can accurately measure the scorch time,Cure time,Curing index and the maximum,Minimum torque and other parameters.
||Room temperature~200 ºC
|Minimum torque reading
|Number swing angle
||±0.5ºC ,±1ºC ,±2ºC (Standard angle 1 degree)
What about the product quality?
For our products,each instrument must be carried out 100% quality calibration and test when delivery goods.With CE certificate,we are very confident in our products,and we will pack them with safety wooden case to protect the machine when transport oversea .
What about usage of the instrument?
we will also give your professional guidance(Product operating manual and video),each products comes with a USB flash drive which have all the details.
What about standards support?
We are strictly following different international standards such as EN,ISO,ASTM,AATC,JIS,GB ect,and had been accepted by SATRA,CSA international standard agency.
What about warranty?
Guarantee one years( if the parts damage within one year, we can replace the part for free)
If customer need any technical support,we can help them solve their problem through email,video meeting.We also can provide door to door service,but customer need to bear the travel fees.
Contact Person: Mr. liangwen Zhong
Tel: 86 13929200954